CITES Appendix II documented•249 territories in the register•Contact fields withheld by default
Reviewed Editorial GuideAudited 2026-10-20

How to store oud: what the material needs and what it will not forgive

The practical care guide for resins, cut pieces and oil: the two things the material itself does to itself over time, the conditions that keep the condition you bought it in, and the claims a stored piece can and cannot later support.

Direct Answer & Executive Summary

Stored oud changes in two ways on its own: resins and oils keep moving in and out of the wood with temperature and humidity, and the piece dries toward the air it sits in. Neither process has a reversible guarantee, so care is not about improving the material but about freezing it: a stable, cool, dry, dark, sealed-in-glass environment bought once and never changed is the whole practice. Everything else — humidity boxes, "seasoning", warming a piece to smell it — is a practice whose outcome the cited sources do not document, and the page treats it as one.

What the material does to itself

Resin in agarwood is not sealed in place. The wood's pores carry oil, and with each change of temperature and relative humidity that oil migrates: it concentrates toward the colder, drier side of the piece and leaves the warmer side comparatively dry. The consequence is that a piece's smell is not a fixed property but a function of the air around it, and two readers smelling the same piece in two rooms can be reporting two genuinely different states of that piece rather than two different powers of nose.

The same physics runs the other way when conditions are held constant. A piece in a stable environment stops changing noticeably, which is the point: what a store provides is not transformation but a stop. A piece that stops changing is a piece whose condition can be described, compared and — this is the point that ties storage to records — described consistently a year from now by a person who was not in the room when it was bought.

The rule the rest of this page hangs on

Storage is not a treatment. There is no published procedure that reliably adds resin to a stored piece, and no source in the registry documents a reversible one. The entire practice is therefore a prevention: keep the conditions the material was in when it was assessed, because the condition description attached to the piece is only as good as the stability of the room it has sat in since.

The conditions that keep the condition

The practice reduces to five conditions. None of them is exotic; the value of listing them is that every one has a failure mode the eye does not announce.

  • Temperature: hold it low and hold it constant. The number matters less than the drift — a piece moved from a hot car to a shelf is stressed harder by the swing than by either end.
  • Relative humidity: the target band is dry, because oil in the wood keeps migrating toward what is drier, and dry is stable in a way humid is not. The registry does not document a numeric band, and this page does not invent one.
  • Light: keep the piece out of it. Resin and wood both degrade in light over time, and the degradation is not recoverable, which makes it the one condition where "less" is measurable.
  • Seal: glass, not plastic. A sealed glass jar holds a stable microclimate around the piece; a plastic container slowly exchanges chemicals with what it holds, which is how a smell gets onto a piece that was not it.
  • One place: the shelf has to be a decision, not a journey. A piece that moves between rooms every few months is a piece that has not been stored; it has been in transit the whole time.

What a stored piece can and cannot later support

This is where storage meets the two records pages on the site. A stored piece supports three later claims: that the material was what it tested as on day one (only if the piece was sealed and stable — because an unsealed, moving piece can have been opened, handled, or re-cut and no one would know), that its current smell is a state of that material in this air (the storage record is what makes that a defensible sentence), and that the condition description attached at purchase still applies (only so long as the room has been the room).

A stored piece does not support an age claim. Storing a piece does not add resin to it, so "aged in storage" is not a documented outcome of the storage record, and the age-claims page says the same thing from the other side: the four kinds of age a seller means are all upstream of storage. And it does not support a value claim, because that is the next page's subject.

Where the practices go undocumented

The trade carries a set of storage practices — humidity-controlled boxes, monthly rotation, warming the piece before smelling it, sealing oil in airtight vials — and this page treats each one the same way: the sources in the registry do not document the outcome of any of them, so the page does not endorse any of them. That is a limit, not an opinion: the registry is a trade-studies and botany-and-trade corpus, and it is silent on storage practice at the resolution this page needs. The one practice the physics above does support is the one the list names: the sealed glass, the stable cool dry dark room, the single shelf. Everything more than that is a claim that would need its own evidence.

What this article does not establish

The source registry does not document storage practice, so the physical conditions on this page are stated as the one claim the physics of oil migration supports, not as a documented regimen; every trade practice beyond that is named as undocumented. This is a limit of the sources, recorded rather than papered over.

Cited Scientific & Trade Sources

Verification Bibliography

3 Verified Sources
Expensive, Exploited and Endangered — a review of the agarwood-producing genera Aquilaria and GyrinopsInternational Tropical Timber Organization (ITTO), Technical Series No. 51 · Retrieved 2026-10-21

Table 1 lists the accepted Aquilaria and Gyrinops species with their IUCN Red List status and their range states, drawn from the IUCN Red List, the cited 2021 and 2022 species assessments, and the Kew Plants of the World Online checklist. The summary establishes that all members of both genera (at least 28 species) are in CITES Appendix II, that A. malaccensis was listed in 1995 and the other species were added in 2005, that the major Aquilaria exporters are Indonesia, Malaysia and Thailand, that more than 98% of the material exported from Malaysia and Indonesia is wild stock while the wood from Thailand is all plantation origin, that the main Gyrinops exporters are Indonesia (including Papua) and Sri Lanka, that plantation agarwood is reported to be of inferior quality and worth less than wild material, and that the global industry has been estimated at more than USD 30 billion with a litre of oil at USD 40,000-50,000. It also states the grading systems in use (Malaysia twelve grades, Indonesia nine, a separate Chinese guide), that the industry still lacks a global grading standard based on quantifiable indicators, and that the taxonomy of the two genera is not settled and requires reassessment. It does not establish the quality or grade of any individual lot, does not establish the price of any particular material, and does not establish that material from a given range state was produced there rather than traded through it.

Agarwood: A reviewInternational Journal of Forestry Research (Hindawi) · Retrieved 2026-10-20

States that CITES Appendix II covers all species of Aquilaria and Gyrinops, and reports fifteen Aquilaria species distributed across the tropical and subtropical regions of Asia, from Pakistan and India through southern China into Southeast Asia. It does not establish the legal status of any individual shipment in any particular jurisdiction.

The trade and use of agarwood (oudh) in the United Arab EmiratesTRAFFIC International, with the UAE Ministry of Environment and Water · Retrieved 2026-10-21

A 2010 study of the agarwood trade and use in the United Arab Emirates, based on interviews with traders, the UAE CITES authorities, Dubai customs and retail survey work. It establishes the import and re-export structure: the UAE and Saudi Arabia are the two dominant Middle Eastern markets; Saudi Arabia is the largest recipient of agarwood re-exported from the UAE, followed by Kuwait and Qatar, which is the entrepôt role the UAE plays; the UAE market has no registered association of importers or traders and little information exchange between companies; the UAE CITES Annual Report submissions began in 2004 and reported chip imports rose from over 56 tonnes in 2004 to more than 162 tonnes in 2007; a CITES export permit is required before a CITES-listed product such as agarwood may be imported, and a UAE import permit is also required; the customs treatment applies a 5% duty on the value of agarwood imports where a customs officer detects them. It also records that the same grade from different origins may carry different value in the market, and gives the 2005-2007 retail price ranges per kilogram in AED. The study is dated 2010 and its price data is from 2005-2007, so it establishes market structure and the import-control regime rather than any current price or current volume. It does not establish who may legally ship into any particular market today, and it does not establish the quality or authenticity of any material.

Review record

Rejaul Karim · Lead Perfumery & Agarwood Sourcing Researcher · 2026-10-20
Reviewed against the cited sources, checked for a question-specific answer, and checked that every assurance is either sourced or explicitly marked as a limitation.

Next steps
  • What a stored piece's records must answer: the storage-and-batch-records guide.
  • The four kinds of "age" a stored piece does not create: the age-claims guide.
  • What a piece is worth coming out of storage: the investment-value page.
Related reading

Need commercial volume or bulk samples?

OudGuide provides a neutral matching service. A redacted brief reaches qualified suppliers without your identity, and your contact details are released only to a supplier you approve by name.

Submit a wholesale requirement